Table of Contents
Advertisement
IPT1020-SD Settings
Initializing the IPT1020-SD
Initializing the IPT1020-SD
CAUTION!
1. Press + + +
2. Press
3. Press
LED Off = don't initialize). See
details.
4. Press
don't initialize).
5. Press
initialize, LED Off = don't initialize). See
Instructions"
6. Press
7. Go off-hook and hang up.
IPT-to-IP Network Connection Instructions
1. Press + + +
2. Press , then press
3. Press
(normally, use : manual setting):
: manual setting, then press
: auto setting by DHCP server, then press
4. Press
an IP address, press the
"192.168.1.241," press
5. Press
mask address is "255.255.255.0, press
94
If you initialize the IP telephone, all settings return to default.
(simultaneously).
L .
to initialize the telephone's function settings (LED On = initialize,
to initialize LCD contrast setting (LED On = initialize, LED OFF =
to initialize the telephone's IP network connection settings (LED On =
below for details.
again to complete the initialization process.
(simultaneously).
to see if the DHCP server is in use or not. Press one of the following
. Enter the IP address for this IPT and press
. Enter the subnet mask number and press
"IPT1020-SD Function Settings" on page 97
"IPT-to-IP Network Connection
to select the Network Setting Mode.
.
button on your dialpad (e.g., if the IP address is
).
.
. To enter the period in
. (e.g., if the subnet
).
Strata CTX DKT/IPT Telephone
for
10/03
- Quick Links:
- User Guide
- Message Waiting
- Volume Control
Hide quick links:
Advertisement
Table of Contents
