Set Lengths for Interleaved 2 of 5
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Lengths for I 2 of 5 may be set for any length, one or two discrete lengths, or
lengths within a specific range.
One Discrete Length
Select this option to decode only those codes containing a selected length. For example, select I 2 of 5 One
Discrete Length, then scan 1, 4, to decode only D 2 of 5 symbols containing 14 characters. Numeric Bar Codes
is in appendix. To change the selection or cancel an incorrect entry, scan Cancel in appendix.
Two Discrete Lengths
Select this option to decode only those codes containing two selected lengths. For example,select I 2 of 5
Two Discrete Lengths, then scan 0, 6, 1, 4, to decode only I 2 of 5 symbols containing 6 or 14 characters.
Numeric Bar Codes is in appendix. To change the selection or cancel an incorrect entry, scan Cancel in
appendix
Length Within Range
Select this option to decode only codes within a specified range. For example, to decode I 2 of 5 symbols
containing between 4 and 12 characters, first scan I 2 of 5 Length Within Range, then scan 0, 4, 1 and 2 (single
digit numbers must always be preceded by a leading zero). Numeric Bar Codes is in appendix. To change the
selection or cancel an incorrect entry, scan Cancel in appendix.
Disable Interleaved 2 of 5
I 2 of 5 - One Discrete Length
I 2 of 5 - Two Discrete Lengths
I 2 of 5 - Length Within Range
- 33 -