Page 1
Barcode Programming Netum barcode scanners are factory programmed for the most common terminal and communications settings. If you need to change these settings, programming is accomplished by scanning the bar codes in this guide. An asterisk (*) next to an option indicates the default setting.
2) Touch Home | Menu | Settings | Wireless & Networks | Bluetooth settings 3) Make sure the device has Bluetooth “On”. Scan for devices. 4) In the list of found devices, select “Netum Bluetooth”. Tap Pair. 5) The scanner will connect to the Android device.
Page 3
Click on “Bluetooth” in the left column. Your IOS device will automatically start searching for any Bluetooth Devices in the area. 3) Once you have identified the “Netum Bluetooth” on the screen, tap on it and you will automatically be connected. The scanner’s LED light will turn solid blue.
Keyboard Language Keyboard layouts vary from country to country. The default setting is U.S. keyboard. In order to let scanner upload the codes in a correct way, you have to set the keyboard language. For example If you use French Keyboard, scan below barcode of “French keyboard”. Then the scanner will upload barcodes according to French keyboard layout.
Scanning Mode Note that there will not have beep sound when you set below modes. As long as light turns off a few seconds before you release the trigger button that indicate the configuration has been done. Key Holding Press the button to trigger the reading, release the button to end the reading.
Factory Default Configuration This confirguration including four steps. Please scan below codes one by one . Note that there will not have a beep sound after you scan code of “default configuration ”.As long as light turns off a few seconds before you release the trigger button that means scanner has read the codes successfully.
Page 7
Custom prefix and suffix Custom Prefix Custom Suffix 1 Custom Suffix 2 Please note previous prefix or suffix will be cleared once you start to add new prefix or suffix. Scan Data Transmission Format To change the Scan Data Transmission Format, scan one of the eight bar codes corresponding to the desired format.
Page 8
Appendix Numeric Bar Codes For parameters requiring specific numeric values, scan the appropriately numbered bar code(s).
Page 9
For Example Custom @ as prefix Step 1: scan “custom prefix” Custom Prefix Step 2: To set these values, scan a four-digit number (i.e. four bar codes) that corresponds to ASCII values. See Numeric Bar Codes in appendix 1. Scan 1043(@) one by one. Step 4: Set Data Transmission Format <PREFIX>...
Page 10
<DATA><SUFFIX 1> Enable Keystroke*/ Functional Key Set Enable Keystroke* Enable functional Key For example if you scan value 1004, Keystroke will be “Up Down”. But if you scan Enable Functional Key Set after you scan the value ” 1004”, you will get functional key set Ctrl +D.
Page 11
Common function Barcodes Enable/Disable UPC-E 1000021 1000020 *Enable UPC-E Disable UPC-E Enable/Disable EAN-8 1000041 1000040 *Enable EAN-8 Disable EAN-8 Enable/Disable EAN-13 1000031 1000030 *Enable EAN-13 Disable EAN-13 Enable/Disable Bookland EAN(ISBN) 1000231 1000230 Enable Bookland EAN *Disable Bookland EAN Decode UPC/EAN Supplementals UPC/EAN Supplementals are bar codes appended according to specific format conventions (e.g.UPC A+2, UPC E+2, EAN 13+2, EAN 13+5).
Page 12
• Only read the barcode with supplementals- The scan engine can only read the barcode with supplementals. 2010E01 Decode UPC/EAN with Supplementals • Auto read supplementals- The scan engine can not only read the barcode with supplementals,but also read the barcode without supplementals. 2010E02 Auto discriminate UPC/EAN Supplementals Eable/Disable Code 128...
Appendix B(ASCII Table) Full ASCLL Code Scan Value Hex Value Keystroke 39 Encode Char CTRL 2 1000 CTRL A 1001 1002 CTRL B 1003 CTRL C CTRL D 1004 1005 CTRL E 1006 CTRL F CTRL G 1007 1008 CTRL H 1009 CTRL I CTRL J...
Page 17
Full ASCLL Code Scan Value Hex Value Keystroke 39 Encode Char 1025 CTRL Y CTRL Z 1026 CTRL [ 1027 1028 CTRL \ CTRL ] 1029 CTRL 6 1030 CTRL - 1031 1032 Space Space 1033 ‘ 1034 1035 1036 1037 1038 &...
Page 20
Full ASCLL Code Scan Value Hex Value Keystroke 39 Encode Char 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 Undefined Support For any inquiries concerning our products, please send an email to service@gzxlscan.com, and we will respond to you as soon as possible. Contact Information Tel.: +0086 20-6626-0708...