7. Follow the instructions by pressing <NC START>. After the measurements have been
successfully made, the tuned values of the parameters are output:
8. Softkey "Accept", to activate the parameters and exit tuning.
9. OR: Enter suitable values in column "Manual" and confirm using softkey "Accept", to
activate the parameters and exit tuning:
10.After completion of the measurement, you can display the complete tuning log: "Tuning log"
softkey.
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA
Drive tuning
10.3 Automatic servo tuning
303