D-Link DIR-615 User Manual page 77

N300
Hide thumbs Also See for DIR-615:
Table of Contents

Advertisement

DIR-615 Wireless N300 Router
User Manual
You can specify the following parameters:
Parameter
Name
Enable
Type
VLAN ID
Untagged Ports
Tagged Ports
Click the APPLY button.
To edit an existing VLAN, select the relevant line in the table. On the page displayed, change the
parameters and click the APPLY button.
To remove an existing VLAN, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
A name for the VLAN for easier identification.
Move the switch to the right to allow using this VLAN.
The type of the VLAN.
Untagged NAT. The VLAN of this type is an external connection
with address translation. It is mostly used to transmit untagged
traffic. When this value is selected, the VLAN ID field and the
Tagged Ports section are not displayed. Only one VLAN of this
type can exist in the system.
Tagged NAT. The VLAN of this type is an external connection
with address translation. It is mostly used to connect to the Internet.
Later the network which identifier is specified in the VLAN ID field
is used as an interface to create a WAN connection (on the
Settings / Internet / WAN page). When this value is selected, the
Untagged Ports section is not displayed.
Bridge. The VLAN of this type is a transparent connection
between an internal port and an external connection. It is mostly
used to connect IPTV set-top boxes.
An identifier of the VLAN.
The section includes the ports and Wi-Fi networks that can be added
to the VLAN.
To add an element, select the checkbox located to the left of it.
To remove an element, deselect the checkbox located to the left of
it.
Select an available value to assign it to this VLAN. To do this,
select the checkbox located to the left of the relevant port.
).
Page 77 of 163
Configuring via Web-based Interface
Description

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents