Working Area Limitation; Working Area Limitation In Bcs (G25/G26, Walimon, Walimof) - Siemens SINUMERIK 840D sl Programming Manual
Nc programming
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Commissioning manual (1102 pages) ,
- Diagnostic manual (1054 pages)
Table of Contents
Advertisement
2.14.3
Working area limitation
2.14.3.1
Working area limitation in BCS (G25/G26, WALIMON, WALIMOF)
G25/G26 limits the working area (working field, working space) in which the tool can traverse.
The areas outside the working area limitations defined with G25/G26 are inhibited for any tool
motion.
The coordinates for the individual axes apply in the basic coordinate system:
The working area limitation for all validated axes must be programmed with the WALIMON
command. The WALIMOF command deactivates the working area limitation. WALIMON is the
default setting. Therefore, it only has to be programmed if the working area limitation has been
disabled beforehand.
NC programming
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
Fundamentals
2.14 Supplementary commands
351
- Quick Links:
- Work Preparation
- Programming Manual
Hide quick links:
Advertisement
Table of Contents
