Contour Definitions: End Point Programming With Angle - Siemens SINUMERIK 840D sl Programming Manual

Nc programming

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Fundamentals

2.9 Motion commands

For further information on the programming of a chamfer or rounding, see " Chamfer, rounding

(CHF, CHR, RND, RNDM, FRC, FRCM) (Page 245) ".

Program code

N10 X10 Z100 F1000 G18

N20 ANG=140 CHR=7.5

N30 X80 Z70 ANG=95.824 RND=10

Contour definitions: End point programming with angle

If the address letter A appears in an NC block, either none, one or both of the axes in the active

plane may also be programmed.

Identifier for programming a chamfer

The specified value corresponds to the width of the chamfer in the direction of

Coordinates in the X direction

Coordinates in the Z direction

; Approach the starting position

; Straight line with angle and chamfer specifica-

; Straight line to intermediate point with angle

and chamfer specification.

; Straight line to end point.

Programming Manual, 12/2019, 6FC5398-2EP40-0BA0

NC programming

Show Quick Links

Table of Contents

Sinumerik 840de sl