Table of Contents
Advertisement
System controls
This section describes the switches, connectors, and LEDs on the AMS 2100/
2300 and the AMS 2500.
Switches
The base and expansion units include the following switches.
Base unit switches
This section describes the locations and functions of the switches in the base
unit.
Base unit switches - front (all models)
The power switch for turning the controllers and drives in a base unit on or
off is also located on the front of the unit. Facing the front of the base unit,
this switch is located at the lower right corner. Pressing on the right button
pushes the right side of the rocker switch and turns the power on. Pressing
on the left button presses on the left side of the rocker switch and turns the
power off.
Figure 1-19
switch panel is located at the lower right corner of the front of the array. The
panel contains a power on-off switch and a mode switch, and is described
in
Table
Figure 1-18: Base Unit Switches - Front
shows the base unit with the front bezel removed. The base unit
1-10.
Introduction
Hitachi AMS 2000 Family Storage System Service Guide
1–19
- Quick Links:
- Disk Drives
- Replacing a Control Unit
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
