Siemens RUGGEDCOM RX1510 Installation Manual page 49

Simatic net industrial ethernet switches

Hide thumbs Also See for RUGGEDCOM RX1510:

Table of Contents

Modules

4.3 Installing/Removing Power Modules

Figure 4.4

Contamination hazard – risk of equipment damage

Prevent the ingress of water, dirts and other debris that may lead to premature

equipment failure. Always make sure slots are not left empty.

Note

Power modules are hot swappable. When installing/removing a power module, it is

not necessary to turn off power to the redundant power module.

Removing a Power Module

To remove a power module, do the following:

Electrocution hazard – risk of serious personal injury or death

Make sure power to the module is turned off before servicing the power supply ter-

minal.

Power Modules

CAUTION

DANGER

Turn off power to the module.

Loosen the screws that secure the module to the chassis until the module can be

removed.

Chassis

Screws

Power Supply

Figure 4.5

Removing a Power Supply

Slide the module out of the chassis.

RUGGEDCOM RX1510

Installation Manual, 12/2019, C79000-G8976-1055-16

Table of Contents

Simatic net ruggedcom rx1500 Simatic net ruggedcom rx1510