Table of Contents
Advertisement
5. Fit the connector
5 12 3 10
Figure 2-4
15-pin D-sub plug fitted to the standard cable
Passive network components
System Manual, 02/2013, C79000-G8976-C282-01
– Fit the lower cable clamp into the grooves of the connector casing.
– Fit the cable into the connector casing so that the braided shield with the copper band
lies in the cable clamp
– Fit the upper cable clamp into the grooves of the connector casing and screw it tight
– Match the wire pairs to the screw terminals
You will find the assignment required for a particular cable type in the section
"Connector pinout (Page 46)".
– Secure the conductors in the screw terminals
– Screw the cover on to the connector casing
Instructions for fitting connectors, attachments and devices
2.3 Electrical networks
53
Hide quick links:
Advertisement
Table of Contents
