8.6.3.5
S1 DIP switch
Table 8- 26
DIP switch S1
Terminal
1
2
It is only permissible to changeover when in the no-voltage state.
Figure 8-21
DIP switch on the upper side of the component
When delivered, "single operation" is set. Both switches are set to the left.
Booksize Power Units
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
Designation
Changeover switch, single
operation / parallel operation
Dummy contact
(not used)
8.6 Control Supply Module CSM
Technical data
Left: Single operation
Right: Parallel operation
Changing over the output characteristic
DC link components
535