Table of Contents
Advertisement
Speech path
Starts the speech path test. You can test the receiver and the monitoring
function by blowing into the receiver.
The symbol for "Handset off-hook" appears on the display when the hand-
set is lifted.
The symbol for "Monitoring on" appears on the display when the monitoring
function is turned on.
Store
Store your input, e.g. your new PIN.
Store data Immediately
You can store data "immediately" at any time.
Warning: You could damage the software if you pull out the plug of your
telephone while saving data!
Store data at
Enter the time at which the data is to be stored. The default setting is
00:00. The telephone cannot be used during storage.
Store data on/off
You can decide whether your data is to be stored in a permanent memory.
T
Test mode
This function can be used to activate various test procedures.
The telephone cannot be used during testing.
Telephone book
You can store up to 10 call numbers, one emergency destination and your
own call number on speed-dial keys.
Tone dialing next
You can send tone-dialed digits during a call,
e.g. to activate an answering machine.
If in doubt, look it up
Menu items on the display "
93
- Quick Links:
- Which Keys for Which Functions
- Call Back
Hide quick links:
Advertisement
Table of Contents
