Direct Installation Of A Cu-/Ncu-/Nx Module On The Line Module - Siemens SINUMERIK 840D sl Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
2.1.5
Direct installation of a CU-/NCU-/NX module on the Line Module
The Line Modules permit the docking of a CU320-/ NCU-/ NX component using the
attachment elements present as standard on the left-hand side of the housing.
Remove the holder for securing the Control Unit.
Various expansion version make it necessary to remove the plastic retaining element:
● If the component to be mounted comes into contact with the lefthand cabinet panel
● for a center infeed using Line Modules 55 / 80 / 120 kW
Use suitable tools to lift the latching device
and push up the holder.
Guide for the SINUMERIK 840D sl machine configuring
Manual, 07/2006 Edition, 6FC5397-6CP10-0BA0
Remove the holder.
Structure of the drive group
After the removing the holder
2.1 Structure
2-7
Advertisement
Table of Contents
