Firmware Version:
Read below command barcode to check scanner's firmware version.
Note: Please always provide scanner's firmware version for reference when you
turn to service team for help.
FAQ
Problem: Some barcodes cannot be read.
Solution:
a. Dirty or unclear barcodes might not be read.
b. The possible reason is that setting for some barcode types are not commonly
used is off by default. You need to activate a specific barcode type to get it to
work. Please contact us for help.
Question: Is there any barcodes for applying or removing suffix or prefix ?
And does the scanner support auto sense mode ?
Yes, please turn to customer service for help.
Question: How to solve the messy code problem encountered while using other
foreign languages?
Solution:
The default language is English. If you use other types of keyboard please refer to
"Keyboard language", See page 6.
Problem: Barcodes can be read, but cannot be displayed.
Solution:
a. Please verify if your scanner is on a store mode.
b. Contact us to get command barcode for configuring the baud rate.
$SW#VER
10