Table of Contents
Advertisement
Engineering
8
Detector line
8.4.4 Maintenance
8.4.4.1 Remove a device
86 | 124
Building Technologies
Fire safety
The device must be uninstalled with the base (if necessary) if it needs to be
removed from the system. Reconnect the wires of the detector line, then operate
on PMI as outlined below. The device is deleted from the system.
w A device is removed and a 'Missing device' fault is reported in fault view.
1. Press
on the keypad.
a The 'Main menu' window is open.
2. Select 'Engineering' and press
a The 'Engineering' window is open.
3. Select 'Detector line' and press
a The 'Detector line' window is open.
4. Select 'Maintenance' and press
a The 'Maintenance' window is open.
5. Select 'Remove a device ' and press
6. Select a line and press
a If there are missing devices, a list of all missing devices is displayed.
7. Select a desired device and press
a A confirmation dialog window is open.
8. Press
to confirm.
a The device is deleted from the configuration.
Pressing
in fault view and pressing
missing device.
.
.
.
.
.
.
in confirmation window, deletes a
A6V10421795_en--_g
2016-11-18
Advertisement
Table of Contents
