Laser Setting Commands; Laser Power: Lpw - Panasonic LP-GS Series Serial Communication Command Manual
Laser marker lp-400/v compatible mode
Hide thumbs
Also See for LP-GS Series:
- Operation manual (358 pages) ,
- Serial communication command manual (208 pages) ,
- Setup & maintenance manual (190 pages)
Table of Contents
Advertisement
3-12 Laser Setting Commands
3-12-1 Laser power: LPW
Sets the laser power for the current file.
• The settings by this command are applied to all objects in the file. If you want to change the laser power correction value
of the specified object only, set the laser power correction by each object setting.
⿎ Setting request data / response data for readout
Start
LPW
code
command
Sub command is "S" for the setting request data and "A" for the response data for readout.
⿎ Readout request data
Start
LPW
code
⿎ Data description
Data length
Name
Laser power
Total data length
⿎ Example of command settings
Condition:
Laser power = 80
• Setting
Transmission data
• Readout
Transmission data
Response data
Sub
[Laser power]
5-byte
R
(Check sum)
End code
Data contents
[byte]
Model
LP-GS051(-L)
LP-GS052
5
LP-RC350S
LP-RF200P
LP-RV200P
5
Fixed length.
[STX]
LPW
[STX]
LPW
[STX]
LPW
ME-LP-GS-SR-COMP-3
(Check
End code
sum)
Setting range
"000.1"–"100.0"
"012.0"–"100.0"
S
080.0
[CR]
R
[CR]
A
080.0
[CR]
Remarks
127
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
