Diagnostics
7.1
Calling diagnostic views
Procedure
1.
2.
Calling the diag‐
nostics area:
Calling the diag‐
nostics area:
Safety Integrated
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
Select the "Diagnostics" operating area.
Press the menu forward key and the "Safety" softkey.
The "Safety Integrated diagnostics overview" window is opened.
Displaying the status of safety drives for Safety Integrated functions
Press the "SI drives" softkey.
The "Status safe drives ..." window is displayed status?
You can call the following diagnostic views using the softkeys with the same name:
● Basic functions
● Extended functions
DisplayingTM54F diagnostics information
Press the "TM54F" softkey.
The "TM54F configuration" window is displayed.
You can call the following diagnostic views using the softkeys with the same name:
● Configuration (if it has not already been opened)
● Inputs
● Outputs
● Drive groups
If several TM54F are available, then you can set another TM54F in these diagnostic
views:
Press the "TM54F" softkey – and using the "TM54F+", or "TM54F-" softkey, select the
required terminal expansion module.
- OR -
7
161