Content Of The Complete Acceptance Test - Siemens SINUMERIK Series Function Manual
Safety integrated
Hide thumbs
Also See for SINUMERIK Series:
- Function manual (956 pages) ,
- Operating manual (940 pages) ,
- Function manual (332 pages)
Table of Contents
Advertisement
5.2
Content of the complete acceptance test
Content of the complete acceptance test
1)
1.1
1.2
1.3
1.4
1.5
1.6
2)
2.1
2.2
2.3
2.4
3)
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4)
Safety Integrated
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
DOCUMENTATION
Documentation of the machine including the safety functions
Machine description (with overview diagram)
Details about the control system
Configuration diagram
Function table
Active monitoring functions depending on the operating mode, the protective doors and
other sensors.
It makes sense that this table is part of the documentation of the engineering work that
has been carried out.
SI functions per axis
Information and data about safety equipment
FUNCTION TEST PART 1
General function test, including a check of the wiring/configuring
Testing the switch-off signal paths
Testing the forced checking procedure of the switch-off signal paths
Testing the forced checking procedure of the inputs and outputs
Testing the Emergency Stop function and the safety circuits
Testing the function table
FUNCTION TEST PART 2
Detailed function test incl. checking the values of the individual SI functions used
Testing the SI Safe Torque Off function (safe operating stop, SBH) - STO
Testing the SI function Safe Stop 1 - SS1
Testing the SI function Safe Stop 2 - SS2
Testing the SI function Safe Operating Stop - SOS
(with evaluated measurement diagram or measured values)
Testing the SI function Safely Limited Speed - SLS
(with evaluated measurement diagram or measured values)
Testing the SI function Safe Speed Monitor - SSM
(with evaluated measurement diagram or measured values)
Testing the SI function Safe Limited Position - SLP
(with evaluated measurement diagram or measured values)
Testing the SI function Safe Direction - SDI
(with evaluated measurement diagram or measured values)
Testing the SI function Safe Brake Control/Safe Brake Test ‑ SBC/SBT
(with evaluated measurement diagram or measured values)
Supplementary measures
Commissioning - acceptance tests
5.2 Content of the complete acceptance test
115
- Quick Links:
- Activating the Commissioning Mode
Hide quick links:
Advertisement
Table of Contents
