Table of Contents
Advertisement
Menu Items in the Setup Menu
Multipoint Setup Menu
38
Chapter 1 Preparation
Make the settings for a teleconference with multiple locations.
Multipoint Setup
Page: 1/2
Multipoint Mode:
Off
Broadcast Mode:
Split
Save
Multipoint Mode: Set to On when holding a point to multi-point
meeting.
On: Holds a Point to multi-point meeting.
Off: Holds a normal meeting.
Broadcast Mode: Selects the broadcast mode.
Split: Displays each party on the split screen.
Voice Activate: Detects the terminal that speaks at the highest level
among the connected terminals, and sends the picture to all the
terminals.
Number of Lines: Selects the number of lines to be used. You can select
1B, 2B, 4B, 6B or 8B.
Restrict: Selects the transfer rate via the ISDN line.
Auto: Connects to a remote party with a normal ISDN line.
56K: Selects this setting when you call a region or country via the
56 Kbps transfer rate.
LAN Bandwidth: Selects the bandwidth to be used when communicating
over a LAN. If you select Other, you can enter a value from 1 Kbps to
1920 Kbps.
Video Mode: Selects the protocol for the video encoding.
H.261: When connecting with the protocol based on H.261.
H.263: When connecting with the protocol based on H.263.
Audio Mode: Selects the protocol to be used for audio encoding.
G.728: The audio bandwidth is narrow but the picture quality is better.
(3.4 kHz)
G.722: The audio bandwidth is wider for better sound quality. (7 kHz)
Multipoint Setup
Page: 2/2
Number of Lines:
Restrict:
LAN Bandwidth:
Video Mode:
Audio Mode:
Cancel
2B
Auto
1920 Kbps
H.263
G.728
Save
Cancel
Advertisement
Table of Contents
