Table of Contents
Advertisement
Connecting With an MCU
You can perform a multiple communication with
making a connection to an MCU (Multipoint Control
Unit).
Once you connect with the MCU that has the chair
control function, the chair control is activated among
99 terminals.
Note
When you have upgraded the system using the
optional PCS-UC601 Upgrade Kit and using a LAN,
the chair control is deactivated.
1
Connect to an MCU.
2
Press the FAR/NEAR button on the Remote
Commander.
The Display Control menu appears on the monitor
screen.
Display Control
Display
Control
Broadcast Mode
Far
Chair Request
Broadcast Mode: Selects the broadcast mode.
Terminal: Selects the terminal number from 1 to
99.
3
Select Chair Request from Broadcast Mode with
the joystick on the Remote Commander.
Advanced Operation
Terminal
Note
When you do an incapable operation, the
indication "Command is rejected by MCU"
appears on the monitor screen.
To see a picture of the selected terminal
1
Select Receive from Broadcast Mode with the
joystick on the Remote Commander.
2
Select the terminal number by moving the joystick
up or down, then press the joystick.
The picture of the selected terminal appears on the
local monitor.
Note
When you have not selected the terminal number, a
terminal which has the lowest number is first selected.
To broadcast a picture of the selected
terminal to all the terminals
1
Select Broadcast from Broadcast Mode with the
joystick on the Remote Commander.
2
Select the terminal number by moving the joystick
up or down, then press the joystick.
A picture of the selected terminal appears on your
monitor and it is broadcast to all terminals.
Chapter 4 Advanced Operation
4
Chapter
107
Advertisement
Table of Contents
