3D-4 FRONT SUSPENSION
• Inspect spring seat for cracks or deformation.
If defective, replace.
• Inspect bump stopper for deterioration.
If defective, replace.
• Inspect rebound stopper and strut mount for wear, cracks or
deformation.
If defective, replace.
SUSPENSION CONTROL ARM / STEERING
KNUCKLE CHECK
Inspect for cracks, deformation or damage.
If defective, replace.
SUSPENSION CONTROL ARM BUSHING
CHECK
Inspect for damage, wear or deterioration.
If defective, replace.
SUSPENSION CONTROL ARM JOINT CHECK
• Check for smooth rotation.
• Inspect ball stud for damage.
• Inspect dust cover for damage.
NOTE:
Suspension control arm and arm joint cannot be sepa-
rated.
If there is any damage to either, control arm assembly must be
replaced as a complete unit.