Table of Contents
Advertisement
Technical/Programming Manual
FT1020G3 Rev 2.2.1
10
Programmable inputs
Four non-supervised programmable inputs are available in FT1020G3 (I0-I3).
In FT1020G3 the Inputs and Outputs expansion board 4583 can also be mounted, five
programmable inputs (Input 0-4) are available which can be configured to be supervised or
non-supervised. See chapter "Expansion boards 458x", page 24.
On the COM loops, the addressable multipurpose I/O unit 3361 with two programmable
inputs can be connected. Each 3361 unit has two programmable inputs (In0/Z and In1),
supervision is not configurable.
Each input is programmed via EBLWin as per the dialog boxes shown in Figure 27 below.
Figure 27 EBLWin "Input" dialog boxes
Different trigger conditions require different additional information, i.e. only the enabled
fields can be filled in.
Note: The 3361 unit, Input 0, has a special input dialog box.
72
Advertisement
Table of Contents
