Door Phone And Door Lock Release (Figure 6-3) - Samsung DCS-816 Programming Manual

Table of Contents

Advertisement

SAMSUNG
DCS-816

6.4 Door Phone and Door Lock Release (Figure 6-3)

The DCS DPIM module is required to install a door phone or a door lock release. The DPIM has a
door phone interface and a door lock release circuit, which can be connected to any DLI port of
DCS-816. The system requires MDF connection for DPIM modules and modular jack connection
for a door phone or a door lock release. DPIM connections can be done through the champ
connector on the base board. See Figure 2-3 and refer to section 2.5 (MDF Cabling).
Use one pair twisted wires, connect each DPIM module to the DLI port of your choice via the
champ connector on the base board and connect a door phone or a door lock release to the
DPIM.
25 PAIR CABLE WITH FEMALE CONNECTOR TO THE BASE CHAMP CONNECTOR
LOCK
DOOR BOX
+ 24VDC
- 1AMP MAX
THREE PAIR
MODULAR CABLE
BLUE
WHITE
6
1
TO CUSTOMER-PROVIDED
DOOR LOCK RELEASE
CONNECTING A DOOR PHONE AND LOCK RELEASE
CHAMP CONNECTION
PIN COLOUR
39/14 BK-BR/ BR/BK T/R, 1
40/15 BK-S/ S-BK
41/16 Y-BL/ BL-Y
42/17 Y-O/ O-Y
43/18 Y-GR/ GR-Y
44/19 Y-BR/ BR-Y
45/20 Y-S/ S-Y
46/21 VL-BL/BL-VL
47/22 VL-O/ O-VL
48/23 VL-GR/ GR-VL T/R, 10
49/24 VL-BR/ BR-VL T/R, 11
50/25 VL-S/ S-VL
LINE
TWO PAIR
MODU LAR CABLE
² CONNECT A DPIM
CONNECTING A DOOR-PHONE TO THE DPIM
² ALL EQUIPMENT ABOVE IS NOT ALLOWED TO
INSTALL OUTDOORS
² DOOR LOCK RELEASE RATE : 24VDC, 1A MAX
CIRCUITS/ FUNCTIONS
T/R, 2
T/R, 3
T/R, 4
T/R, 5
T/R, 6
T/R, 7
T/R, 8
T/R, 9
T/R, 12
4
RED
5
BLACK
3
GREEN
2
YELLOW
TO ANY DLI PORT AFTER
6-4
Installation
February, 1999
st
DLI port on base
nd
DLI port on base
rd
DLI port on base
th
DLI port on base
th
DLI port on base
th
DLI port on base
th
DLI port on base
th
DLI port on base
th
DLI port on base
th
DLI port on base
th
DLI port on base
th
DLI port on base
£Ð£«
£Ð£-
DOOR PHONE
£Ì£±
£Ì£²
FIGURE 6-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents