Sony Handycam DCR-HC1000 Operation Manual page 14
Digital video camera recorder
Hide thumbs
Also See for Handycam DCR-HC1000:
- Service manual (101 pages) ,
- Application manual (44 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
7
Slide the POWER switch up to (CHG)
OFF.
The
(flash)/CHG (charge) lamp lights up
and charging starts.
/CHG
Flash/charge lamp
After charging the battery
The
(flash)/CHG (charge) lamp turns off
when the battery is fully charged. Disconnect
the AC Adaptor from the DC IN jack.
To remove the battery pack
Battery release tab
Battery pack
1
Set the POWER switch to (CHG) OFF.
2
Open the battery compartment lid.
3
Unlatch the battery release tab in the
direction of the arrow and remove the
battery pack.
b Note
• If you do not use the battery pack for a long time, use
up the battery pack completely before storing it. See
page 124 about storage of the battery pack.
14
Getting started
POWER switch
To check the remaining battery – Battery
Info
OPEN
You can check the battery's current charge level
and its current remaining recording time both
during charging or when the power is turned off.
1
Set the POWER switch to (CHG) OFF.
2
Press OPEN and open the LCD panel.
3
Press DISPLAY/BATT INFO.
The battery information appears for about 7
seconds.
Keep the button pressed to view it for about
20 seconds.
BATTERY INFO
BATTERY CHARGE LEVEL
0%
50%
REC TIME AVAILABLE
LCD SCREEN
:
VIEWFINDER
:
A Battery charge level: Displays
approximate remaining amount of
power left in the battery pack.
B Approximate possible recording time
using the LCD panel.
C Approximate possible recording time
using the viewfinder.
DISPLAY/
BATT INFO
POWER switch
100%
108 min
121 min
Hide quick links:
Advertisement
Table of Contents
