Table of Contents
Advertisement
8 | Starting up the C 60
24 / 108
In the 'File' menu select 'New' to create a new project.
In the Toolbox select the C 60 and drag it into the Main Area. A pop up window to specify
the C 60 program archive appears.
1.
An information shows that the archive is valid or not.
Select the program archive delivered with the C 60 (.PST file).
Click 'Next'.
1.
Select 'Race track'.
2.
Choose the way to switch display pages that fits to your hardware configuration.
3.
Click 'Finish'. The C 60 is inserted into the project and RaceCon tries to connect to the
device.
4.
RaceCon detects configuration differences between the C 60 and the RaceCon project
and asks for permission for data download.
5.
Click 'OK' to proceed.
The download starts and the C 60 carries out a reset.
After the reset RaceCon reconnects to the C 60. Local configuration on both the PC and C
60 match (Indicated by green background and dot). The C 60 is now connected to Race-
Con.
Data Logger C 60
Bosch Motorsport
Advertisement
Table of Contents
