Sony Betacam SX DNW-A22 Operation Manual page 31
Digital videocassette player
Hide thumbs
Also See for Betacam SX DNW-A22:
- Specifications (4 pages) ,
- Maintenance manual (286 pages)
Table of Contents
Advertisement
Resetting the menu settings to their
factory default values (menu item B20)
Time data display
SET button
1
Set menu item B20 RESET SETUP to ON.
"PUSH SET BTN" appears in the time data
display, and "Push SET button" appears on the
monitor screen.
2
Press the SET button.
The current active menu settings (see page 5-7) are
reset to their factory default settings.
3
Press the SET button again.
The settings are saved and the menu display
disappears from the time data display.
Switching between 525/625 line systems
(menu item 013)
Using the following procedure, you can set basic menu
item 013, 525/625 SYSTEM SELECT, to "ON", and
then switch between 525 (NTSC) and 625 (PAL).
Notes
• Before carrying out this operation, consult the person
responsible for the installation.
• When using the DNW-A22 in 625 mode or when
using the DNW-A22P in 525 mode, you cannot play
back the Betacam/Betacam SP tapes.
(The following procedure shows by way of example
how to switch from a 525 (NTSC) system to a 625
(PAL) system.)
1
Select menu item 013.
The time data display and the monitor screen
connected to the COMPOSITE VIDEO OUTPUT
2 (SUPER) connector show the following displays.
Time data display
Monitor screen
ITEM-013
525/625 SYSTEM
SELECT
2
Holding down the JOG button, turn the search dial
to change the setting from "OFF" to "ON".
The displays change as follows.
Time data display
Monitor screen
ITEM-013
525/625 SYSTEM
SELECT
Push SET button!!
OFF
ON
(Continued)
5-5
Chapter 5 Menu System
Advertisement
Table of Contents
