Playback In Shuttle Mode - Sony Betacam SX DNW-A22 Operation Manual
Digital videocassette player
Hide thumbs
Also See for Betacam SX DNW-A22:
- Specifications (4 pages) ,
- Maintenance manual (286 pages)
Table of Contents
Advertisement
4-2-3 Playback in Shuttle Mode
In shuttle mode, you can control the speed of playback
by the angular position of the search dial. The range of
playback speed is as follows:
• Using a Betacam SX tape: ±50 times
• Using an analog Betacam tape: ±35 times (DNW-
A22)/±42 times (DNW-A22P)
There are detents on the search dial at the still position
and at ±10 times normal speed.
To carry out playback in shuttle mode, use the
following procedure.
1
Press the SHUTTLE button or search dial so that
the SHUTTLE button is lit.
Pressing the search dial toggles between jog mode
and shuttle mode.
2
Turn the search dial to the desired angle
corresponding to the desired playback speed.
Playback in shuttle mode starts.
3
To stop playback in shuttle mode, return the search
dial to the center position, or press the STOP
button.
The search dial function to toggle between jog
mode and shuttle mode every time being pressed
can be prohibited by changing the setting of
extended menu item 101.
To return to normal-speed playback
Press the PLAY button.
3
1
1,2,3
To alternate between normal-speed playback
and shuttle mode playback
Set the search dial to the position corresponding to the
desired shuttle playback speed, then switch between
normal-speed playback and shuttle playback by
pressing the PLAY and SHUTTLE buttons alternately.
For intermittent shuttle mode playback, press the
STOP and SHUTTLE buttons alternately.
4-2-4 Playback Using the
Capstan Override Function
You can use the capstan override function to adjust the
playback speed temporarily. The range of speed
adjustment is ±15% in steps of 1%. This function is
convenient for playback phase synchronization with
another VTR playing back the same program.
1
Hold down the PLAY button, and turn the search
dial in the desired direction to adjust the playback
speed.
The SERVO indicator goes off.
2
When the adjustment is completed, release the
PLAY button.
The tape transport returns to normal speed, and the
SERVO indicator comes on again.
2
1
4-3
Chapter 4 Playback
Advertisement
Table of Contents
