Table of Contents
Advertisement
Configuration
7.2
Network settings
7.2.1
Basic Settings
26
Siemens Building Technologies
Fire Safety & Security Products
You can set up your camera's basic settings, DDNS, and FTP server by selecting
Network Settings in the Configuration menu.
Basic
Camera Name
Camera Name Enable
Network
DHCP
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Port
Stream1-Stream2,
cropping1-5:
UPnP
AUDIO output
Input your camera name here. The default name is "nwcam05".
The IP address is automatically obtained when you select ON;
otherwise, select OFF to manually set up the network setting.
Input your IP address here when you select DHCP off.
Please use default number: 255.255.255.0
Leave blank as default setting. It is not necessary to enter Default
Gateway if it is not used.
Ask your Network Administrator for Default Gateway information.
(Same as above)
(Same as above)
We recommend to use the default; if it needs to be changed please
check with system administrator.
If "ON" is selected, the camera can be detected automatically by the
PC. No need to have IpFinder installed.
If "ON" is selected, a voice message of camera's IP address can be
delivered to external speaker via Audio output port.
01.2009
Advertisement
Table of Contents
