Table of Contents
Advertisement
RULES FOR SAFE OPERATION
(Continued)
22.
OUTDOOR
USE EXTENSION
CORDS. When tool
33.
is used outdoors, use only extension cords suitable
for use outdoors.
Outdoor
approved
cords are
marked with the suffix W-A, for example - SJTW-A
or SdOW-A.
23.
KEEP CUTTERS
CLEAN
AND SHARP.
Sharp
cutters minimize stalling and kickback.
24.
KEEP HANDS
AWAY
FROM
CUTTING
AREA.
Keep hands away from
cutters.
Do not reach
underneath
work while cutter is rotating. Do not
attempt to remove material while cutter is rotating.
25.
NEVER USE IN AN EXPLOSIVE
ATMOSPHERE.
Normal sparking of the motor could ignite fumes.
26.
INSPECT
TOOL
CORDS
PERIODICALLY
and
if damaged,
have repaired at your nearest Sears
Repair
Center.
Stay constantly
aware
of cord
location.
27.
28.
29.
30.
INSPECT
EXTENSION
CORDS
PERIODI-
CALLY and rep,lace if damaged.
KEEP
HANDLES
DRY,
CLEAN,
AND
FREE
FROM
OIL AND GREASE.
Always use a clean
cloth when
cleaning.
Never
use brake
fluids,
gasoline, petroleum-based
products
or any strong
solvents to clean your tool.
STAY ALERT. Watch what you are doing and
use common sense. Do not operate tool when
you are tired. Do not rush.
CHECK
DAMAGED
PARTS.
Before further
use
of the tool, a guard or other part that is damaged
should be carefully checked to determine
that it
will operate
properly
and perform
its intended
function.
Check for alignment
of moving parts,
binding
of moving
parts,
breakage
of parts,
mounting,
and any other conditions
that may
affect its operation.
A guard or other part that is
damaged should be properly repaired or replaced
by an authorized
service center unless indicated
elsewhere
in this instruction manual.
31.
DO NOT USE TOOL
IF SWITCH
DOES
NOT
TURN IT ON AND OFF. Have defective switches
replaced by an authorized
service center.
32.
INSPECT
FOR and remove all nails from lumber
before routing.
34.
35.
DRUGS,
ALCOHOL,
MEDICATION.
Do not
operate tool while under the influence of drugs,
alcohol, or any medication.
WHEN
SERVICING
USE
ONLY
IDENTICAL
CRAFTSMAN
REPLACEMENT
PARTS.
POLARIZED
PLUGS.
To
reduce
the risk of
electric
shock, this tool has a polarized
plug (one
blade is wider than the other). This plug will fit in
a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still
does
not fit, contact
a qualified
electrician
to
instatl the proper outlet. Do not change the plug
in any way.
36.
DO NOT USE TOOL
UNDER
"BROWN-OUT"
OR
OTHER
LOW
VOLTAGE
CONDITIONS.
Also, do not use with any device that could cause
the power supply voltage to change.
37.
WHEN
USING
THIS
ROUTER
WITH
A
ROUTER
TABLE,
HELP
PREVENT
POS-
SIBLE
SERIOUS
INJURY
BY KEEPING
THE
CUTTER
GUARDED
AT ALL TIMES.
Use only
router tables,
with guards,
that have been de-
signed for use on routers
that are of this type,
size, and weight.
38.
SAVE
THESE
INSTRUCTIONS.
Review
them
frequently
and use them to instruct others who
may use this tool. If you loan someone this tool,
loan them these instructions also.
WARNING:
Some dust created by power sanding, sawing, g rinding,
drilling,
and other
construction
activities
contains
chemicals
known to cause cancer,
birth defects
or
other
reproductive
harm. Some examples
of these
chemicals are:
•.
• lead from lead-based
paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures
varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals:
work in a well ventilated
area, and work with approved
safety equipment,
such '
as those dust masks that are specially designed to filter
out microscopic
particles.
Page 4
Hide quick links:
Advertisement
Table of Contents
