12
en | Enabling and Disabling Features
Feature
Supervision Tracking
Lanyard
Autotracking Interval
Supervision Tracking Interval
Table 5.2: Factory Reset Features
5.3
Activating Configuration Mode
Configuration mode on the transmitter is activated by going into the test mode. Note that this
mode is not available if the Man-Down or Lanyard snatch alarms are triggered and active.
While holding down the Test button, press the Alarm button and release. The transmitter is in
configuration mode once it emits 3 short and fast beep tones every 3 seconds.
5.4
Configuring the Transmitter
Transmitter type, Autotracking interval, Man-Down pre-beep to duration, Supervision Tracking,
Man-Down and Lanyard Snatch features can be configured wirelessly on the transmitter via
the coordinator using the Central Console software. To establish communication between the
transmitter and the coordinator, you need to know their Radio IDs. Their unique Radio IDs can
be found engraved on the devices. Using the Central Console software, enable or disable the
features accordingly and send the configuration to the transmitter. Please refer to the Security
Escort Technical Reference Manual for further details.
5.5
Exiting Configuration Mode
The transmitter will exit configuration mode automatically once the configuration has been
transferred successfully to the transmitter. If no coordinator/receiver is present, user can exit
the configuration mode immediately by pressing the Test button. The transmitter will enter
operational mode once it exits the configuration mode.
Caution!
The ALLPLEX track system is not a substitute for safe behavior. Do not take personal risks
!
believing that the system will protect you.
2014.03 | V1.0.0 | DL
Value
Disabled
Disabled
7 secs
90 secs
Installation Manual
ALLPLEX track Personnel Transmitter
Robert Bosch (SEA) Pte Ltd