Installing Custom Buttons
Custom engraved buttons* are available for Lytemode products.
If you received custom buttons with your unit or obtain them in the
future, use the following procedure for installation.
To install custom buttons:
Step 1. At 6-button unit, remove faceplate.
Step 2. Remove 6-button plate by removing two screws.
Step 3. Remove existing button pad.
Step 4. Insert custom button pad and re-assemble components.
PC Board
Button Pad
6-Button Plate
Screw (4)
6-Button Unit
Faceplate
* Available from Lightolier Controls: www.lolcontrols.com
19
6-Button Remote Station User's Guide