Changing Channel Levels
The 6-Button Remote Station can perform Master Raise/Lower
functions. Pressing Raise or Lower will increase or decrease all
channel levels, respectively. This can be done at any time and will
not affect the stored levels.
To change channel levels:
ON
A
B
C
D
OFF
Remote Keypad Functions
When set in Mode 2 (see "Mode" on page 9), the 6-Button Remote
Station will transmit key presses and releases to an ILS Master
Station. In this configuration, the LEDs are controlled by Remote
Commands. For key press instructions, refer to the User's Guide
which came with your Master Station unit.
16
Operation
Step 1. Select any Scene (ON, A-L). Refer to
"Selecting a Scene" on page 15.
Step 2. Press Raise to increase channel levels or
Lower to decrease channel levels.