Exploring Profinet Networks; Figure 36: Explore Profinet Network From Pnc001; Figure 37: Explore Profinet Network From Embedded Profinet Controller - GE PACSystems RX3i User Manual
Profinet io-controller
Hide thumbs
Also See for PACSystems RX3i:
- Command line interface manual (116 pages) ,
- User manual (100 pages) ,
- Application manual (39 pages)
Table of Contents
Advertisement
Chapter 3. Configuration
3.5
Exploring PROFINET Networks
To explore the PROFINET networks in the system while PROFICY Machine Edition is online with the RX3i
system, and while the PROFINET Controller is connected to its network, right-click on the Target icon (not the
PNC) and select Explore PROFINET Networks under the Online Commands menu item.
The Explorer view shows version information about all the devices on the associated network. Figure 36 shows
a PNC001 (located in Slot 6 of its CPU rack) with a single VersaMax PNS on its network. Figure 37 shows an
embedded PROFINET Controller (embedded in a CPE330 / CPE400 / CPE100/CPE115) connected to an RX3i
PNS module.
Note that all modules physically present in the remote nodes controlled by the PNS are displayed, regardless of
whether the devices are configured or not.
Figure 36: Explore PROFINET Network from PNC001
Figure 37: Explore PROFINET Network from Embedded PROFINET Controller
56
PACSystems* RX3i & RSTi-EP PROFINET IO-Controller User Manual
GFK-2571N
Advertisement
Table of Contents
