Additional information
An additional component of the "CU link" type is displayed for each expandable master module .
Note
Assign a drive object component to all components of a device.
Messages that refer to the component distribution and set DRIVE-CLiQ type of a device are
displayed below the device:
Figure 5-13
5.4.2
Drive object list
The following criteria must be satisfied so that the DO list can be read:
● The DO list is in the current project directory.
● The DO list is called "topo.uvdx".
You will find further information in Section "Settings" under "Setting the path for drive object
list" (Page 18).
Figure 5-14
All drive objects (DO) are listed on the first level. When a DO is selected, the associated
components are listed.
SINUMERIK Integrate Create MyConfig - EPLAN Electric P8 Add-In
Operating Manual, 12/2017, A5E43099659B-AA
Assigning warnings and messages to drive objects - excerpt from "Assign drive objects"
dialog, left-hand side
Structure of the DO list - excerpt from "Assign drive objects" dialog, right-hand side
Configuring with EPLAN Add-In
5.4 Assigning drive objects
29