Troubleshooting; Resetting The System; Problems Following Initial System Installation - Acer Altos R720 Series User Manual
2u rack optimized server
Hide thumbs
Also See for Altos R720 Series:
- Installation & configuration manual (104 pages) ,
- Installation & configuration manual (42 pages)
Table of Contents
Advertisement
Troubleshooting
This chapter helps you identify and solve problems that might occur
while you are using the system.
For any issue, first ensure that you are using the latest firmware and
files. Firmware upgrades include updates for BIOS, the BMC, and the
hot-swap controller. In addition to the server firmware and files, make
sure to update any drivers used for components you have installed in
your system, such as video drivers, network drivers and SAS drivers.
If you are unable to resolve your server problems on your own, contact
your dealer or local Acer representative for assistance.
Resetting the system
Before going through in-depth troubleshooting, attempt first to reset
the system using one of the methods below.
To do this
Soft boot reset to clear the system memory and reload the
operating system.
Clear system memory, restart POST, and reload the OS.
Cold boot reset. Turn the system power off and then on.
This clears system memory, restarts POST, reloads the OS
and halts power to all peripherals.
Problems following initial system installation
Problems that occur at initial system startup are usually caused by an
incorrect installation or configuration. Hardware failure is a less
frequent cause. If the problem you are experiencing is with a specific
software application, see "There is problem with the application
software" on page 143.
135
Press
Ctrl+Alt+Del
Reset button
Power button
Advertisement
Table of Contents
Troubleshooting
