Declaration Of Parameters; Address Space - Siemens SIMATIC S7-1500 Manual
Digital output module dq 16x230vac/2a st relay 6es7522-5hh00-0ab0
Hide thumbs
Also See for SIMATIC S7-1500:
- System manual (523 pages) ,
- Function manual (402 pages) ,
- Manual (188 pages)
Table of Contents
Advertisement
Parameters/address space
4.2 Declaration of parameters
4.2
Declaration of parameters
No supply voltage L+
Enabling of the diagnostics at no or insufficient supply voltage L+.
Reaction to CPU STOP
Determines the reaction of the output to the CPU going into STOP state or when the
connection to the CPU is interrupted.
4.3
Address space
The module can be configured differently in STEP 7; see following table. Depending on the
configuration, additional/different addresses are assigned in the process image output/input.
Configuration options of DQ 16x230VAC/2A ST
You can configure the module with STEP 7 or with a GSD file.
When you configure the module by means of the GSD file, the configurations are available
under different short designations/module names.
The following configurations are possible:
Table 4- 2
Configuration options
Configuration
1 x 16-channel without value status
1 x 16-channel with value status
2 x 8-channel without value status
2 x 8-channel with value status
1 x 16-channel with value status for
module-internal Shared Output with
up to 4 submodules
16
Short designation/module
name in the GSD file
DQ 16x230VAC/2A ST
DQ 16x230VAC/2A ST QI
DQ 16x230VAC/2A ST S
DQ 16x230VAC/2A ST S QI
DQ 16x230VAC/2A ST MSO
Digital output module DQ 16x230VAC/2A ST Relay (6ES7522-5HH00-0AB0)
Configuration software, e.g., STEP 7
Integrated in hardware
catalog STEP 7 V13,
SP1 or higher with
HSP 0119
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
X
(PROFINET IO only)
Manual, 07/2017, A5E34934019-AC
GSD file in
STEP 7 as of V12 or
STEP 7
as of V5.5 SP3
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
X
(PROFINET IO only)
Advertisement
Table of Contents
