Table of Contents
Advertisement
(Display Sample)
Display
1
%
Indicates the functional character string.
0
Sets zero indication.
2
Set the R.justified. (single-byte space)
3
*
The display digit from 1 to 8 is displayed in the "*".
4
C
Indicates the function character of the counter.
5
0
Sets the counter with zero fixed.
The counter function is the function increasing the value from the initial value to final value every
step.
Refer to "3-4-3 Setting of Counter Function" (P.106) for details.
REFERENCE
•
The processing of the final value is repeated. The counter ending is output at final value, and
the value is cleared at the next trigger, and the marking is started from the initial value.
•
In case of marking from the initial value again, set the current value at "0" or perform the marking after
CHECK
transferring. In case of performing marking in remote mode, reset the counter for marking from
the initial value.
•
The value is not counted-up at test marking and guide indication.
CHECK
% 0 4 : C 0
1
2
3
4
Description
5
97
- Quick Links:
- I/O Connector
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
