Sony DVS-9000SF User Manual page 98
With ccp-9000 series center control panel
Hide thumbs
Also See for DVS-9000SF:
- Operation manual (24 pages) ,
- User manual (1228 pages) ,
- Installation manual (42 pages)
Table of Contents
Advertisement
Blurring image motion
Use the following procedure.
1
2
3
4
5
Erasing the afterimages that remain in memory whenever a
keyframe is passed
Press [Decay Eraser], turning it on.
When the effect passes a keyframe, the afterimage is erased before writing a
new afterimage.
Selecting the freeze timing
In the <Decay Freeze Timing> group, select the timing for motion decay
freezing.
Frame: freeze in frame units.
Field: freeze in field units.
Applying stardust to the afterimage portion
The afterimage portion becomes stardust, and gradually disappears.
98
DME Special Effect Operations
In the DME menu, select VF5 'Light/Trail' and HF3 'Motion Decay.'
The Motion Decay menu appears.
Press [Motion Decay], turning it on.
This enables motion decay, and you can now use the knobs to adjust the
parameters.
Set the following parameter.
Knob
Parameter
Adjustment
1
Video Decay Degree of blurring of the video
signal
a) At the setting 0.00, there is no afterimage. At a setting of 100.00, the afterimage does not
decay.
In the <Decay Mix Mode> group, select the way in which the video signal
is blurred.
Soft: mix the live image and the afterimage.
Hard: show the lighter of the live image and afterimage.
To erase the afterimage, press [Decay Eraser], turning it on.
Setting values
a)
0.00 to 100.00
Advertisement
Chapters
Table of Contents
