Sony DVS-9000SF User Manual page 34
With ccp-9000 series center control panel
Hide thumbs
Also See for DVS-9000SF:
- Operation manual (24 pages) ,
- User manual (1228 pages) ,
- Installation manual (42 pages)
Table of Contents
Advertisement
Example: Moving the right edge position in the "minus" direction.
Left
Top
Bottom
Softening the inner and outer sides of art edges
Use the following procedure.
1
2
Setting the way in which art edge colors change
Use the following procedure.
1
34
DME Special Effect Operations
Right
Art edge portion
In the Art Edge menu, press [Soft], turning it on.
Adjust the following parameters.
Knob
Parameter
Adjustment
1
Inner H
Simultaneously adjust softness of
left and right inner edges
2
Inner V
Simultaneously adjust softness of
top and bottom inner edges
3
Outer H
Simultaneously adjust softness of
left and right outer edges
4
Outer V
Simultaneously adjust softness of
top and bottom outer edges
5
All
Simultaneously adjust softness of
all inner and outer edges.
In the <Art Edge Source> group of the Art Edge menu, select the color
pattern to apply to the art edges.
Flat Color: Uses Color 1 (see page 37) as a flat color.
Gradation Matte: Color 1 changes to Color 2 (see page 37) at the border
lines (see step 2).
Rainbow Matte: The color set as Color 1 changes hue into color on the
border lines.
Radial Gradation: Color 1 on the inner side is mixed into Color 2 on the
outer side, according to the shape of the art edge.
Moving in the
minus direction
Position after
Position before
moving
moving
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
Value of Outer H
shown
Advertisement
Chapters
Table of Contents
