Bosch Solution 2000 Installation Manual page 65
Hide thumbs
Also See for Solution 2000:
- User manual (31 pages) ,
- Programming (12 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
Control Panel
Step 3: Configure A-Link Plus for Network Connect
Configure Network Connect (TCP/IP SSL) when B426 is connected.
1.
2.
3.
4.
5.
6.
7.
8.
Configure Network Connect (Cloud) when B426-M is connected.
1.
2.
3.
4.
5.
6.
Step 4: Configure the Email through A-Link Plus
1.
2.
Configuration menu
Comm -> Receiver
Config
Comm -> Network
Config
Network module
programming -> Module
1 # -> Basic Network
Settings
Bosch Security Systems, Inc.
Open A-Link Plus.
Click File > Communication Setting and select the Local IP Address of your computer.
Enter the local port number.
Add a new customer, then open the customer interface.
From the Customer Information tab, click Search to find the Control Panel IP Address (IP
address of the B426), e.g. "192.168.226.127".
Enter real port number in the Control Panel Port field. From the B426 network modules,
you can find the real port number, such as 7700.
Open the Control Panel Configuration tab. Select Solution 2000 or Solution 3000
according to your control panel type.
Open the Link tab. Select Network Connect (TCP/IP SSL) and click Connect. A-Link Plus
tries to connect to the control panel using the B426.
Click Upload from Control Panel.
Open A-Link Plus.
Add a new customer.
From the Customer Information tab, enter the cloud module UID in the Cloud ID field
when the cloud module is connected and Cloud Connection is enabled.
Select the Control Panel Configuration tab. Select Solution 2000_V2.00 or Solution
3000_V2.00 according to your control panel type.
Select the Link tab. Select Network Connect (Cloud) and click Connect. A-Link Plus tries
to connect to the control panel using the B426-M.
Click Upload from Control Panel.
Select the Control Panel Configuration tab and configure the Email parameters as
indicated in the following table.
Return to the Link tab and reconnect the control panel. Click Download to Control Panel
to complete the process. Check the parameters in the control panel to verify the
parameter value changes were successfully downloaded.
Parameter
Transmit Format
Subscriber ID Number
IP + Port / Email
Network Module 1
IP Address
Local Port Number
Subnet Mask
Default Gateway
DNS Server Address
Value
Email
001234
Receiver@163.com
Use and configure or
Used, B4xx-M
Installation Guide
A-Link Plus Application | en
Remark
Select corresponding Receiver
Email title (example)
Inbox (example)
Enter original B426/B426-M
parameters with DHCP auto
assigned IP address or static
IP address.
2017.10 | 03 | F.01U.298.026
65
- Quick Links:
- Zone Options
- Installer Menu
Hide quick links:
Advertisement
Table of Contents
