Table of Contents
Advertisement
Service
Manual
Description
The motion of feeding clamps comprises the following elements:
• 4 limit switch 'FC71', 'FC72', 'FC73' and 'FC75'.
• 1 back-geared motor 'M715' to move and move back the clamps.
• 1 motor 'M723' to do the spacing and closing of clamps.
• 1 potentiometer 'P1' to adjust the engine torque for the spacing clamps.
• 1 relay 'KA1' to control the M723 motor.
The FC71 and FC72 limit switch are mounted on the aluminium profi le guide of clamps. They
are accessible by removing the splash guard of the guide of clamps.
The FC73 and FC75 limit switch are mounted on main switch support in the left casing. They
are accessible by removing the left side frame.
The M715 reducer-motor is mounted on the left casing. It is accessible by removing the left side
frame.
The M725 motor is mounted on the aluminium profi le guide of clamps. It is accessible by
removing the splash guard of the guide of clamps.
The P1 potentiometer is mounted on the control display.
The KA1 relay is mounted in the electric cabinet. It is accessible by removing the left side frame.
advance/return clamps
back-geread motor
04102011/GB
21-2012
Feeding: Motion
spacing clamps
motor
30
1
Advertisement
Chapters
Table of Contents
Troubleshooting
