Huawei OptiX OSN 550 Configuration Manual page 139

Multi-service cpe optical transmission system
Table of Contents

Advertisement

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Step 3 Configure the pass-through services of NE2.
1.
2.
3.
Issue 02 (2011-06-30)
Parameter
Source
Timeslot
Range(e.g.
1,3-6)
Sink Slot
Sink VC4
Sink Timeslot
Range(e.g.
1,3-6)
Prot
Source Slot
ecti
on
Ser
Source VC4
vice
Source
Timeslot
Range(e.g.
1,3-6)
In the NE Explorer, click
Choose Configuration > SDH Service Configuration from the Function Tree.
Click Create on the lower-right pane to display the Create SDH Service dialog box. Set
the parameters that are required, and then click OK.
Parameter
Value in
This
Example
Level
VC12
Direction
Bidirectiona
l
Source Slot
1-SL4D-2
(SDH-2)
Source VC4
VC4-1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value in
Description
This
Example
1-5
In this example, five E1 services are configured
between NE3 and NE5. Hence, the working
service source occupies VC-12s 1-5.
2-SL1D-1
In this example, the SL1D board in slot 2 of NE4
(SDH-1)
is configured as the sink line board of the working
service. See
VC4-1
In this example, the working service sink uses the
timeslots of VC4-1.
1-5
In this example, five E1 services are configured
between NE3 and NE5. Hence, the working
service sink occupies VC-12s 1-5.
1-SL4D-1
In this example, the SL4D board in slot 1 of NE3
(SDH-1)
is configured as the source line board of the
protection service. See
VC4-1
In this example, the protection service source uses
the timeslots of VC4-1.
1-5
In this example, five E1 services are configured
between NE3 and NE5. Hence, the protection
service source occupies VC-12s 1-5.
, and then select NE2. Click OK.
Description
In this example, E1 services are configured. Hence,
Level of the E1 services is set to VC12.
In this example, Direction of the service is set to
Bidirectional.
In this example, the SL4D board in slot 1 of NE2 is
configured as the source line board. See
In this example, the working service source uses the
timeslots of VC4-1.
3 Configuring SDH Services
Figure
3-16.
Figure
3-16.
Figure
3-16.
3-57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents