Siemens SITRANS LG250 Operating Instructions Manual page 29

Guided wave radar, foundation fieldbus coax probe

Hide thumbs Also See for SITRANS LG250:

Table of Contents

Setup - Probe length

Setup - Application - Type

of medium

Setup - Application - Ap-

plication

Setup - Application - Me-

dium, dielectric constant

PBD-51041056

With the distance units you can choose between m, mm and ft and

with the temperature units betwenn °C, °F and K.

In this menu item you can enter the probe length or have the length

determined automatically by the sensor system.

When choosing "Yes", then the probe length will be determined

automatically. When choosing "No", you can enter the probe length

manually.

In this menu item you can select which type of medium you want to

measure. You can choose between liquid or bulk solid.

In this menu item, you can select the application. You can choose

between level measurement and interface measurement. You can

also choose between measurement in a vessel or in a bypass or

standpipe.

Note:

The selection of the application has a considerable influence on all

other menu items. Keep in mind that as you continue with the param-

eter adjustment, individual menu items are only optionally available.

You have the option of choosing the demonstration mode. This mode

is only suitable for test and demonstration purposes. In this mode, the

sensor ignores the parameters of the application and reacts immedi-

ately to each change.

In this menu item, you can define the type of medium (product).

This menu item is only available if you have selected level measure-

ment under the menu item "Application".

You can choose between the following medium types:

SITRANS LG250 - Operating Instructions

Table of Contents