Irig-B - GE L30 Instruction Manual
Ur series
line current differential
system
Hide thumbs
Also See for L30:
- Instruction manual (702 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (586 pages)
Table of Contents
Advertisement
3 HARDWARE
Lightning strikes and ground surge currents can cause large momentary voltage differences between remote ends of the
communication link. For this reason, surge protection devices are internally provided at both communication ports. An iso-
lated power supply with an optocoupled data interface also acts to reduce noise coupling. To ensure maximum reliability, all
equipment should have similar transient protection devices installed.
Terminate both ends of the RS485 circuit with an impedance as shown below.
c) 100BASE-FX FIBER OPTIC PORTS
Ensure that the dust covers are installed when the fiber is not in use. Dirty or scratched connectors can lead to high
losses on a fiber link.
NOTE
The fiber optic communication ports allow for fast and efficient communications between relays at 100 Mbps. Optical fiber
can be connected to the relay supporting a wavelength of 1310 nm in multi-mode.
IRIG-B is a standard time code format that allows stamping of events to be synchronized among connected devices. The
IRIG-B code allows time accuracies of up to 100 ns. Using the IRIG-B input, the L30 operates an internal oscillator with 1
µs resolution and accuracy. The IRIG time code formats are serial, width-modulated codes that can be either DC level
GE Multilin
Figure 3–24: RS485 SERIAL CONNECTION
L30 Line Current Differential System
3.2 WIRING
3
3.2.10 IRIG-B
3-25
- Quick Links:
- B.4.1 Modbus Memory Map
Hide quick links:
Advertisement
Table of Contents
