Siemens SINUMERIK 840D sl Operating Manual page 511
Milling
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Parameter
γ
(for ShopMill program)
Directly position rotary axes
B1
(for ShopMill program)
C1
(for ShopMill program)
αC
(for ShopMill program)
Hirth joint
Tool
Preferred direction (for
ShopMill program)
Machining
Infeed (only for ∇ and ∇
+ ∇∇∇)
Thread
Milling
Operating Manual, 05/2017, A5E40868956
Description
● 0°
● 180°
● The required angle can be freely entered
Directly align the tool with the swiveling axes:
The required angle can be freely entered
The required angle can be freely entered
Rotational position for a pole position
● Round to the next Hirth joint
● Round up to Hirth joint
● Round down to Hirth joint
Note:
For machines with a Hirth joint
Tool tip when swiveling
● Tracking
The position of the tool tip is maintained during swiveling.
● No tracking
The position of the tool tip is not maintained during swiveling.
Preferred direction of the swivel axis for several possible alignments of the machine
● ∇ (roughing)
● ∇∇∇ (finishing)
● ∇ + ∇∇∇ (roughing and finishing)
● Linear:
Constant cutting depth infeed
● Degressive:
Constant cutting cross-section infeed
● Internal thread
● External thread
Programming technological functions (cycles)
10.4 Turning - milling/turning machine
Unit
Degrees
Degrees
Degrees
Degrees
511
Advertisement
Table of Contents
