Table of Contents
Advertisement
Enable Auto Export
3. (Optional) Under Replication Settings, specify replication settings.
For more information about configuring replication for a partition, or to set up
replication for the partition at a later time, see
4. Click Apply.
After you add a partition, you must add media and map drives to a host before the
partition can be used for backups (see
Mapping" on page
Editing a VTL Partition
Edit a VTL partition to modify the settings for the partition, for example, to change the
emulated library model or the number of storage slots and virtual tape drives.
To edit a VTL partition:
1. Select the partition and click Edit.
The Edit VTL Partition & Replication Settings page displays (see
Replication Settings Page" on page
Figure 151: Edit VTL Partition & Replication Settings Page
2. If the partition is online, click Offline to take the partition offline. To edit a partition,
it must be offline.
3. Under Partition Settings, enter information about the partition:
ETERNUS CS800
When a tape is moved from a Storage Slot to an I/E
Slot, depending on the Auto Export setting, the
media: will be removed from the virtual I/E slot, if
Auto Export is enabled. (default) will remain in the
virtual I/E slot, if Auto Export is disabled.
"Media Add" on page 211
220).
209).
"Replication" on page
and
"Remote Host
"Edit VTL Partition &
10.3 VTL Configuration
340.
209
- Quick Links:
- Eternus Cs800 S6 Hardware
Hide quick links:
Advertisement
Table of Contents
