Radius Trap - HP 3600 v2 Series Command Reference Manual
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
Default level
3: Manage level
Parameters
radius-scheme-name: RADIUS scheme name, a case-insensitive string of 1 to 32 characters.
Description
Use the radius scheme command to create a RADIUS scheme and enter RADIUS scheme view.
Use the undo radius scheme command to delete a RADIUS scheme.
By default, no RADIUS scheme is defined.
A RADIUS scheme can be referenced by more than one ISP domain at the same time.
A RADIUS scheme referenced by ISP domains cannot be removed.
Related commands: display radius scheme.
Examples
# Create a RADIUS scheme named radius1 and enter RADIUS scheme view.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1]
radius trap
Syntax
radius trap { accounting-server-down | authentication-error-threshold | authentication-server-down }
undo
radius
authentication-server-down }
View
System view
Default level
2: System level
Parameters
accounting-server-down: Sends traps when the reachability of the accounting server changes.
authentication-error-threshold: Sends traps when the number of authentication failures exceed the
specified threshold. The threshold is represented by the ratio of the number of failed request transmission
attempts to the total number of transmission attempts. It ranges from 1 to 100 and defaults to 30. This
threshold can only be configured through the MIB.
authentication-server-down: Sends traps when the reachability of the authentication server changes.
Description
Use the radius trap command to enable the trap function for RADIUS.
Use the undo radius trap command to disable the trap function for RADIUS.
By default, the trap function is disabled for RADIUS.
With the trap function for RADIUS, a NAS sends a trap message in the following cases:
trap
{
accounting-server-down
|
59
authentication-error-threshold
|
- Quick Links:
- Local User Configuration Commands
Hide quick links:
Advertisement
Table of Contents
