Local-User Password-Display-Mode; Password - HP 3600 v2 Series Command Reference Manual
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
[Sysname-luser-user1]
local-user password-display-mode
Syntax
local-user password-display-mode { auto | cipher-force }
undo local-user password-display-mode
View
System view
Default level
2: System level
Parameters
auto: Displays the password of a local user in the mode that is specified for the user by using the
password command.
cipher-force: Displays the passwords of all local users in cipher text.
Description
Use the local-user password-display-mode command to set the password display mode for all local
users.
Use the undo local-user password-display-mode command to restore the default.
By default, the password display mode is auto.
If you configure the local-user password-display-mode cipher-force command, all existing local user
passwords will be displayed in cipher text, regardless of the configuration of the password command. If
you also save the configuration and restart the switch, all existing local user passwords will always be
displayed in cipher text, no matter how you configure the local-user password-display-mode command
or the password command. The passwords configured after you restore the display mode to auto by
using the local-user password-display-mode auto command, however, are displayed as defined by the
password command.
Related commands: display local-user and password.
Examples
# Specify to display the passwords of all users in cipher text.
<Sysname> system-view
[Sysname] local-user password-display-mode cipher-force
password
Syntax
password [ { cipher | simple } password ]
undo password
View
Local user view
35
- Quick Links:
- Local User Configuration Commands
Hide quick links:
Advertisement
Table of Contents
