8.3.7 Replacing the Hopper ASSY
① Unscrew 2 washer-faced heads and remove the Hopper Cover
② Loosen 1 bind-head screw on the Hopper ASSY
③ Lift the Hopper ASSY, and pull out the Hopper ASSY
④ Take the reverse steps to attach the Hopper ASSY.
*When screwing the bind-head screws make sure the Hopper ASSY is attached horizontally.
* Be cautious of the position of the Elevator Arm.
Bind-Head
screw
(screw
down)
Hopper Cover
Washer
Faced heads
screw
Tools Needed: Magnetic Philips Screwdriver (No.2)
#27 Hopper ASSY
REV0 10.02.15
-H8-17-