HP MSR1002-4 Configuration Manual page 224
Flexnetwork msr series
Hide thumbs
Also See for MSR1002-4:
- Installation manual (46 pages) ,
- Configuration manual (108 pages) ,
- Command reference manual (471 pages)
Table of Contents
Advertisement
Item
IP multicast routing and IPv6
multicast routing
MLDv1
PIM and IPv6 PIM
Figure 72 Network diagram
S 2
VPN b
GE1/0/1
CE b1
R 1
S 1
CE a1
GE1/0/1
VPN a
Network requirements
•
Enable IP multicast routing on P.
•
Enable IP multicast routing for the public network on PE 1, PE 2, and
PE 3.
•
Enable IPv6 multicast routing for VPN instance a on PE 1, PE 2, and
PE 3.
•
Enable IPv6 multicast routing for VPN instance b on PE 2 and PE 3.
•
Enable IPv6 multicast routing on CE a1, CE a2, CE a3, CE b1, and CE
b2.
•
Enable MLDv1 on GigabitEthernet 1/0/2 of PE 1.
•
Enable MLDv1 on GigabitEthernet 1/0/1 of CE a2, CE a3, and CE b2.
Enable PIM-SM on the public network and IPv6 PIM-SM for VPN instances
a and b:
•
Enable PIM-SM on all interfaces of P.
•
Enable PIM-SM on all public network interfaces and IPv6 PIM-SM on
private network interfaces of PE 1, PE 2, and PE 3.
•
Enable IPv6 PIM-SM on all interfaces that do not have receivers on
CE a1, CE a2, CE a3, CE b1, and CE b2.
•
Configure Loopback 1 of P as a C-BSR and a C-RP for the public
network to provide services for all IPv4 multicast groups.
•
Configure Loopback 1 of CE a2 as a C-BSR and a C-RP for VPN
instance a to provide services for all IPv6 multicast groups.
•
Configure Loopback 2 of PE 3 as a C-BSR and a C-RP for VPN
instance b to provide services for all IPv6 multicast groups.
R 2
Loop1
Loop1
PE 2
GE1/0/3
P
PE 1
Public
Loop1
215
VPN a
Loop1
CE a2
Loop1
GE1/0/1
PE 3
Loop2
CE b2
VPN a
R 3
GE1/0/1
CE a3
GE1/0/1
R 4
VPN b
- Quick Links:
- Table of Contents
- Introduction to Multicast
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
